Product description
Gravel, trail or exploration; you decide
Preparation is the key to a successful adventure in unknown territories. Our experience in developing and riding the flagship G and M series bikes has resulted in a whole host of performance-enhancing features that have been incorporated into the AG28. The AG28 is designed to be your uncompromising companion when you unknowingly bite off more than you can chew.
- Application: gravel, bikepacking
- Internal rim width: 28mm
- Tire compatibility: 45mm or larger
- Wheelset weight: 1480g
- Fabricated carbon laminate tuned for compliance
- Molded external spoke holes
- Wide hookless bead anti pinch flat technology
- Best in class impact resistance
- Optimized for tubeless
- Lifetime incident protection and 5 year factory warranty
- Handmade in Ogden, Utah
Looking for custom decals?Check out our Decal Builder to purchase colorful and custom decals.
PRODUCT SPECIFICATIONS
BUILD OPTIONS
Hub Offerings ENVE Alloy CL, Industry Nine 1/1 CL
Front Spacing: 12×100 | Rear: 12×142
Wheel Size 650B
Pricing ENVE Alloy CL: $1,750
Industry Nine 1/1 CL: $1,750
*Lockrings not included
DIMENSIONS
RIM SPECIFICATIONS FRONT REAR
Diameter 650b 650b
Depth 21mm 21mm
Inner width 28mm 28mm
Outer width 36.5mm 36.5mm
Number of holes 24 24
Effective rim diameter 564 564
Recommended minimum tire size 45mm 45mm
Recommended tire sizes 47mm - 57mm (2.25″) 47mm - 57mm (2.25″)
WEIGHTS
FRONT WHEEL REAR WHEEL SET
Rim weight 372g 372g 744g
ENVE Foundation Disc CL 676g 804g 1480g
ENVE i9 1-1 CL 692g 836g 1528g
RIDE TUNED
Through the use of on-board data collection devices and comparison with subjective feedback from test rides, our laminate design team has refined the AG25 & AG28 to deliver a ride quality that is both responsive and compliant, supportive yet forgiving.
- The shallow 21mm rim depth improves vertical compliance and vibration dampening.
- Rim cross-section and laminate optimized for responsive power transfer and cornering stability
EXTERNALLY SHAPED NIPPLE
By using patented ENVE technology for shaped spoke holes and external nipple configuration, you can be sure you're riding a wheel built for reliability and serviceability when you need it most.

WIDE HOOKLESS BEAD FOR CRUSH RESISTANCE
The uncomfortable impact between rock and rim is something we've all experienced when the desire to shred the trail overrides our better judgment. Unless you're riding with too much tire pressure, this impact usually results in a flattened tire.
The AG25 and AG28 feature our patent-pending wide hookless bead technology, proven to be a 60% improvement over a traditionally narrower hookless bead to prevent flats.

BUILT TO SHAKE OFF YOUR BAD IDEAS
So you've decided to hit the mountain bike trail with your gravel vehicle. Or maybe you had no other choice, it was the only way to get from point A to point B. That's why we designed and tested the Foundation AG wheels using our proven M-Series impact testing protocol. The result is a wheel that delivers confidence when you need it most, even when you're not looking for it.
BIG TIRES FOR BIG RIDES
The performance of a wheel is only as good as the tires and setup you use for your next adventure.
The AG25 and AG28 feature an inner rim width optimized for the latest trends in large volume tubeless tires.
AG25 = Inner rim width of 25 mm | Recommended minimum tire size of 32 mm
AG28 = Inner rim width of 28 mm | Recommended minimum tire size of 45 mm
Check out our tire pressure guide to make sure you are using the optimal tire pressure.
ENVE FOUNDATION ROAD HUB
The Foundation Road Hub utilizes the core technologies of ENVE and offers a high-performance, maintenance-free riding experience.
- The flange spacing and geometry of the hub shell have been designed to maximize performance metrics such as wheel and drivetrain stiffness
- ID360 40t drive mechanism for efficient and responsive power transmission
- Maintenance-free, high-quality, sealed NTN steel bearings with full contact
- Perfect preload ™.

USA MADE, PROTECTED FOR LIFE
It's no secret that we at ENVE are proud of our US-based manufacturing capabilities. Like all of our rims, the Foundation Collection and AG25 are handcrafted and assembled in our state-of-the-art carbon rim manufacturing facility in Ogden, Utah. The AG25 is covered by ENVE's Lifetime Incident Protection Program and 5-year factory warranty.
PRODUCT SPECIFICATIONS
| CLINCHER | FRONT | REAR | WHEELSET |
|---|---|---|---|
| Rim Weight | 372g | 372g | 744g |
| ENVE Foundation Disc CL | 676g | 804g | 1480g |
| ENVE i9 1-1 CL | 692g | 836g | 1528g |
| RIM SPECS | FRONT | REAR |
|---|---|---|
| Diameter | 650b | 650b |
| Depth | 21mm | 21mm |
| Internal Width | 28mm | 28mm |
| External Width | 36.5mm | 36.5mm |
| Hole Count | 24 | 24 |
| Effective Rim Diameter | 559 | 559 |
| Minimum Recommended Tire Size | 45mm | 45mm |
| Recommended Tire Sizes | 47mm - 57mm (2.25") | 47mm - 57mm (2.25") |

| SPOKE INFORMATION* | FRONT LENGTH (NDS/DS) | REAR LENGTH (NDS/DS) | SPOKE CROSS |
|---|---|---|---|
| ENVE Foundation Disc CL | 272/272 | 272/270 | 2x |
| Industry Nine 1/1 | 274/276 | 274/270 | 2x |
| *This wheelset is built with Sapim CX Sprint spokes. |
WHAT IS INCLUDED
Tubeless kit:
-2 x valve stems
-1x roll of tape (enough for 3 wheels)
-2x pressure relief valve stem nuts
- Wheel manual
-Wheel assembly card

